Description
Carel's electronic expansion valves with stepper motor are controlled by a controller/driver, as well as a temperature and a pressure sensor.
The EVD evo driver/regulator can be equipped with a detachable display for configuration and settings.
At start-up, a number of questions are asked about valve type, refrigerant, pressure sensor value and the type of unit to be controlled.
Then the basic configuration is ready.
The driver/expansion valve combination can also be used for capacity control, liquid injection or hot gas injection.
In this case, the driver is controlled by an external 0-10 V signal.
Contactez nous pour plus d’information
The EVD evo driver/regulator can be equipped with a detachable display for configuration and settings.
At start-up, a number of questions are asked about valve type, refrigerant, pressure sensor value and the type of unit to be controlled.
Then the basic configuration is ready.
The driver/expansion valve combination can also be used for capacity control, liquid injection or hot gas injection.
In this case, the driver is controlled by an external 0-10 V signal.
